Complete unit consisting of belt conveyor and metal detector, complete with reject function on conveyor.
We have one of these available.
Manufactured by EB Engineering.
Belt Length: 2300mm
Belt Width: 800mm
Powered by a three phase 1/4hp geared motor.
The geared motor runs through a single phase to three phase variable speed drive, and is chain driven to the drive sprocket.
The belt is pneumatically tensioned.
The metal detector is made by Graseby Goring Kerr.
As items are detected, the inbuilt PLC controller shortens the conveyor pneumatically as the rejected item reaches the end of the belt. This drops the rejected item into a bin or onto another conveyor etc.
The belt takes 33 seconds to travel the length of the conveyor, which gives and approx belt speed of 4.18 metres per minute.
Metal Detector Opening: 1000mm wide x 50mm high.
Click on the link to see the conveyor and metal detector operating:
https://youtu.be/d3byuR2CKaw
Manufactured by EB Engineering.
Belt Length: 2300mm
Belt Width: 800mm
Powered by a three phase 1/4hp geared motor.
The geared motor runs through a single phase to three phase variable speed drive, and is chain driven to the drive sprocket.
The belt is pneumatically tensioned.
The metal detector is made by Graseby Goring Kerr.
As items are detected, the inbuilt PLC controller shortens the conveyor pneumatically as the rejected item reaches the end of the belt. This drops the rejected item into a bin or onto another conveyor etc.
The belt takes 33 seconds to travel the length of the conveyor, which gives and approx belt speed of 4.18 metres per minute.
Metal Detector Opening: 1000mm wide x 50mm high.
Click on the link to see the conveyor and metal detector operating:
https://youtu.be/d3byuR2CKaw
2600.00 + GST
2400 L x 1500 W x 1100 H (mm)
410 kg