W. Rietveld Ltd Otago's Largest Machinery Recycler
☰ MENU
ID#268
 60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank
 This Power pack was made up by Tracgrip Hydraulics in Palmerston North. Originally powered by a 45kw/60hp three phase electric motor with a Sperry Vickers dual hydraulic vane pump.
 It has an oil storage tank with a tank capacity of 820 litres.

The motor has been removed since the photos were taken, and is no longer available.

The pump is Sperry Vickers (cast in the end: 200.3) Then it has stamped in it: 3 25VQ 25A 17 1CC (well this is the best I can make from the bad markings)

It is a double vane pump with common suction line. The pressure lines have been set up so it works like a log splitter pump.

Both pressure lines go into one for high flow, as the pressure increases the higher flow pump diverts just to the tank and the higher pressure, lower flow pump carries on to do the job.

This power pack was used on a very large hydraulic press.
It has a control bank with 2x three position (with spring to centre) manual lever control valves.

 1800.00 + GST
 1850L x 1500W x 1400H (mm)
 kg

 60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank   60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank   60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank   60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank   60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank   60hp Electric Powered, Hydraulic Power-pack With 820Litre Oil Tank
Trademe Auctions

Newsletter

Solar Powered Web Design by Light Design
top ⇧