W. Rietveld Ltd Otago's Largest Machinery Recycler
☰ MENU
ID#555
 Tube Conveyor/Elevator
 13 metre long Tube conveyor/elevator powered by a 4Kw Three Phase electric motor.
 We have one of these available.

Was running up until removal due to factory closure.

Overall dimensions of the whole unit are approx 13 metres long x 800mm wide x 1550mm high.

The belt width is approx 395mm wide, the belt is textured to allow for better grip. This conveyor was previously used for sawdust/woodchip.

The conveyor is powered by a 4Kw Three phase electric geared motor.

Motor Rating: 4Kw
Motor Speed: 1400RPM
Gearbox Make: David Brown
Gearbox Model: MO72B
Ratio: 11.35:1
Output Speed: 126 RPM approx

The conveyor is then chain driven from the gearbox to the drive drum. The sprocket on the gearbox measures approx. 120mm diameter. The sprocket on the drive drum measures approx. 150mm diameter and the drive drum measures approx 400mm diameter.

The input flange on the conveyor has an internal measurement of 390mm x 240mm.

The output flange has an internal measurement of 480mm x 250mm.

The top end section of the conveyor has suffered some damage on removal and this will need repaired before use.
 1850.00 + GST
 13,000 L x 800 W x 1550 H (mm)
 kg

 Tube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/ElevatorTube Conveyor/Elevator
Trademe Auctions

Newsletter

Solar Powered Web Design by Light Design
top ⇧